Clocking Methods

To utilize Wageloch's time and attendance software to its full extent, we tend to recommend a clocking method to record your employees' clock in and out times. This saves time when it comes to Completing Timesheets as you will visually be able to determine when an employee has started and finished their shift.

Biometrics

Other Hardware

Mobile Clocking

Mobile clocking on the Wageloch Mobile app is disabled by default - staff need to be enabled to gain access to this function. While this is the same mobile app outlined in Using The App (Staff) for viewing rosters, requesting leave and submitting availability, Mobile Clocking is a separate tool that is enabled on a case by case basis.
There are two options for mobile clocking; enable one employee at a time (1a), or enable for many staff at once (1b).

1a. Mobile Clocking Setup - Individual	1b. Mobile Clocking Setup - Bulk	2. Clocking In/Out, adding Manual Times
Click on the Staff list in the top left. Click on the staff card for the employee you wish to enable. In the staff card, click the Options category. On the right side, you should see a tick box for Enable Mobile Clocking. Tick this box and click Done. To push this update out to staff phones immediately: Click the Settings cog in the top right. Select General from the menu. Click the Update Staff Portal button in the bottom left. The system will lock up momentarily, then say Done. The staff member will see Clock In and Clock Out buttons on their Wageloch Mobile App shortly after.	Click the Settings cog in the top right. Select Portal/Mobile App settings from the menu and select Bulk Mobile Staff Clock. In the dropdown in the top left, make sure this is set to No Mobile Access. Tick the boxes next to the name of those you want to enable (or use the Select All option) Click Allow Access to send out a welcome email. You'll be prompted to confirm how many staff you're enabling, click Done. To push the update out to staff phones immediately: Select General from the menu. Click the Update Staff Portal button in the bottom left. The system will lock up momentarily, then say Done. The staff member will see Clock In and Clock Out buttons on their Wageloch Mobile App shortly after.	To find out more about how staff can clock in, clock out and add in manual clock times for their shifts, you can information in the Mobile Clocking article.

PIN

PIN code clocking is a simple, easy and reliable method of having staff clock in/out in Wageloch. The setup is the same through different platforms and can be utilized at any time if needed. Staff create a 4 digit numerical code to clock in/out for their shifts. PIN codes are available in the following versions of Wageloch:

• Time Kiosk desktop installation
• Time Kiosk app on tablet
• Time Kiosk via internet browser.

The configuration for each platform is slightly different, but we'll be outlining these below.

PIN via Desktop	PIN via Tablet	PIN via Web Browser	StafF PIN Creation	Deleting PIN codes
After following the Installing Wageloch guide: Open Wageloch Time Kiosk from the Desktop When being prompted for the Clocking Method, select Password and enable PIN. Done to save. -OR- Click on the Settings cog and select General. Enter in your Wageloch administrator details and log in. Select Password and enable PIN from the list of clocking options. Done to save.	Once you've completed your initial device setup, including wifi and power, follow the steps below. Download Wageloch Time Kiosk from the App Store (iOS) or Google Play Store (Android). You'll be prompted to log in with your Wageloch administrator details - press Configure. Site: This should already be pre-populated with your business name. New Installation: Give the device a name such as "Clocking Tablet", "Wageloch Tablet" or whatever you wish to name it. Clock Method: Select PIN Code (4 digits) from the list. Click Save to finish.	Visit https//clock.wageloch.com.au You'll be prompted to log in with your Wageloch administrator details - press Configure. Site: This should already be pre-populated with your business name. New Installation: Give the device a name such as "Clocking Tablet", "Wageloch Tablet" or whatever you wish to name it. Clock Method: Select PIN Code (4 digits) from the list. Click Save to finish.	Once your installation and setup has been completed, staff will be ready to register with a PIN. Click on the employee name. Type a 4-digit PIN Type it again Registration is now complete; staff can test clocking in/out.	Deleting PIN codes may be required if the staff member forgets their PIN or if it was mistyped. Open Wageloch Time Kiosk. Click on the Settings cog and select Delete PIN Code. Click on the name of the employee from the list. Click Delete in the bottom left and Done to complete. You can now register the employee PIN again.

Password

Password clocking is a simple, easy and reliable method of having staff clock in/out in Wageloch. The setup is the same through different platforms and can be utilized at any time if needed. This requires staff to create a personal password with a minimum of 6 characters (letters, numbers, symbols) to clock in/out for their shifts.

Passwords are available in the following versions of Wageloch:

• Time Kiosk desktop installation
• Time Kiosk app on tablet
• Time Kiosk via internet browser.

The configuration for each platform is slightly different, but we'll be outlining these below.

Password via Desktop	Password via Tablet	Password via Web Browser	StafF Password Creation	Deleting Passwords
After following the Installing Wageloch guide: Open Wageloch Time Kiosk from the Desktop When being prompted for the Clocking Method, select Password. Done to save. -OR- Click on the Settings cog and select General. Enter in your Wageloch administrator details and log in. Select Password from the list of clocking options. Done to save.	Once you've completed your initial device setup, including wifi and power, follow the steps below. Download Wageloch Time Kiosk from the App Store (iOS) or Google Play Store (Android). You'll be prompted to log in with your Wageloch administrator details - press Configure. Site: This should already be pre-populated with your business name. New Installation: Give the device a name such as "Clocking Tablet", "Wageloch Tablet" or whatever you wish to name it. Clock Method: Select Password from the list. Click Save to finish.	Visit https//clock.wageloch.com.au You'll be prompted to log in with your Wageloch administrator details - press Configure. Site: This should already be pre-populated with your business name. New Installation: Give the device a name such as "Clocking Tablet", "Wageloch Tablet" or whatever you wish to name it. Clock Method: Select Password from the list. Click Save to finish.	Once your installation and setup has been completed, staff will be ready to register with a Password. Click on the employee name. Type a password (minimum of 6 characters, can be upper/lowercase and numbers) Type two more times for confirmation. Registration is now complete; staff can test clocking in/out.	Deleting Passwords may be required if the staff member forgets their password or if it was mistyped. Open Wageloch Time Kiosk. Click on the Settings cog and select Delete Password. Click on the name of the employee from the list. Click Delete in the bottom left and Done to complete. You can now register the employee password again.